To compare a FeCrAl wire price, first match the alloy grade, wire size and order quantity. Then put the offers on the same net weight or length basis and account for the same delivery costs. A short retail spool and a production order can both look inexpensive until you check how much wire each price buys.
You can use this guide to write a request for quotation, or RFQ, and compare the replies on one sheet. Start with the details that would change which wire you can use. Leave uncertain costs visible until the supplier confirms them.
Key Takeaways
- Match the grade, section and tolerance before comparing prices.
- Use net wire weight for price per kilogram and keep packaging weight separate.
- Record each offer’s currency, quantity tier and delivery terms.
- Check inspection documents and charges as part of the order scope.
- Keep public listing prices separate from a written quote for your order.
What a FeCrAl Wire Price Includes

Start With the Unit on the Listing
A FeCrAl wire price may be shown for a spool, a stated length or a net kilogram. Check the unit before comparing the amount. Write down the grade, size and pack quantity before you enter that amount on a comparison sheet.
For a short sample, a pack price may be the most useful figure. If you need a run of wire for production, record how much each supplier will ship and how it will be packed. Ask for net weight when the FeCrAl wire price is based on mass.
Read Retail Prices With the SKU
TEMCo’s catalog displayed the following prices when checked on November 6, 2026. The entries are for Kanthal A-1 round wire in two different gauges. Keep the price labels and pack sizes attached to the amounts.
| Listing | Pack length | Standard price | Direct sale price |
|---|---|---|---|
| A-1 round wire, 20 AWG | 25 ft | USD 11.97 | USD 10.88 |
| A-1 round wire, 27 AWG | 25 ft | USD 10.19 | USD 9.26 |
These are catalog observations. Check the checkout total and terms for a purchase. The two gauges serve different dimensional requirements, so the table illustrates the role of the SKU rather than ranking the wires.
Illustrative scenario: A Sample Spool and a Production Order
A technician needs a short length to check how a wire fits a fixture. Purchasing also needs a FeCrAl wire price for the planned production run. The technician records the exact sample SKU and length, while purchasing asks the supplier to quote the production quantity in net kilograms.
They keep the two purchase purposes on separate rows. That gives the engineer a record of the sample and gives purchasing the scope it needs to compare volume offers.
Send SPARK your material, dimensions and required quantity to discuss a quote for the intended order.
Which Specifications Change the Quote?
Name the Grade and Supplied Condition
A FeCrAl wire price should name the exact material offered. If you are working from a drawing, copy the designation and any required finish into the request. If the grade is open, describe the application and ask the supplier to identify the proposed grade and the document that supports it.
The SPARK range includes named alloys, such as 0Cr21Al6Nb. Use the product listing to identify the material you want to discuss, then ask for confirmation of the actual size and condition offered.
Keep a proposed substitute on its own line. Before comparing its FeCrAl wire price with the requested grade, ask the material reviewer to check the proposed specification. Send the grade, data sheet and service details to the reviewer.
A named wire data sheet shows which properties apply to that specific grade and form. Use the current data for the material on the quotation when you check the specification.
Specify the Section and Tolerance
For round wire, state the diameter and the acceptable range. If the drawing uses gauge, identify the gauge system or provide the required diameter as well. For a flat section, give the width and thickness, along with the drawing requirements that apply to each.
A FeCrAl wire price for a nominal size can leave questions about the exact dimensions and how they will be checked. Ask for the offered tolerance in writing. Use the same acceptance limits when comparing two offers for the same drawing.
For a new project, include the application and temperature basis when you request material options. Keep the furnace setpoint and the intended element temperature in separate fields. SPARK FeCrAl wire selection guide. SPARK guide to temperature and service conditions.
Put FeCrAl Wire Price Quotes on the Same Basis

Use Net Wire Weight or Confirmed Length
For a FeCrAl wire price per kilogram, divide the amount for the agreed scope by the net kilograms of wire in that scope. Exclude the spool and packaging from the denominator. If the offer lists only gross shipment weight, ask the supplier to state the net wire quantity before using the result.
For a price per meter, use the total confirmed wire length covered by the amount. If one offer uses length and another uses weight, request both quantities from the suppliers. A drawing-based estimate can help with planning when section and grade-specific density are known, provided you label the estimate and its assumptions.
Keep a column for the original unit and price. Add a separate column for the converted figure. Show which amounts went into the FeCrAl wire price and where they came from.
Check the Quantity Before You Convert the Price
Ask how the supplier measures net wire weight and whether the quantity shown on the offer is an estimate or a commitment. If the order calls for several packs, ask for both the total net quantity and the planned quantity per pack. A total can meet the request while the pack arrangement still needs review for your equipment or handling process.
When purchasing uses a FeCrAl wire price per meter, confirm whether the quoted length can arrive in separate pieces. If continuous lengths matter, state the minimum usable length for each piece and ask the supplier to confirm it. Keep this requirement next to the total length in the RFQ. Both fields can affect whether the material meets the job.
Match Currency and Delivery Scope
Write the currency beside every quoted amount. If conversion is needed, save the exchange rate and its date with the comparison. Use the same currency basis for all charges and keep the supplier’s original amounts in the record.
Record the named delivery location and trade term as stated by the supplier. Then list freight, insurance, taxes and duties under the party responsible for each charge. Give each item a status such as included, separate or awaiting confirmation.
For a FeCrAl wire price comparison, calculate a delivered total only after you know which charges apply. Until then, label it as a partial total and list the open costs next to it. You can still compare the confirmed material lines while your team gathers the missing information.
Illustrative scenario: The Two Prices Cover Different Costs
Two suppliers quote the same net weight and wire specification. One FeCrAl wire price includes packaging and delivery to the stated location. The other lists packaging separately and leaves freight open.
The buyer asks for an updated breakdown and adds both offers to the same worksheet. The confirmed product costs can be reviewed first. The delivered totals will be ready for comparison when the open freight line is resolved.
Check Quantity, Packaging and Inspection
Ask Which Quantity the Offer Covers
A FeCrAl wire price may apply to a specific order size or a range of quantities. Record the minimum order, the quoted quantity and the unit used for each. If you need separate sample and production orders, ask for separate offers so their terms are clear.
Ask whether the quantity applies per grade, per diameter or across the order. When you need several wire sizes, list them separately with their expected quantities. The supplier can then confirm which lines qualify for the stated terms.
Ask the supplier to show quantity tiers and freight separately. Record the exact quantity on which each tier depends. Keep the offer date and expiry beside the amount.
Describe What Receiving Inspection Needs
List the documents you expect with the shipment. If you need resistance results, specify the unit and reference temperature in your request. If you need a dimensional check, identify the drawing requirement and ask which record will accompany delivery.
State whether the wire should arrive on spools or in another form. Ask for the planned net wire quantity per pack, and list any label details you need to link a pack to its order and documents. Include packing charges in the FeCrAl wire price comparison when the supplier quotes them separately.
Build an RFQ and Compare the Responses

Put the Requirements in One Sheet
You can use the following fields in an email or purchasing form. Enter one row per grade and size. Attach the drawing if the dimensions or finish are hard to describe, and give the revision so the supplier can identify it in the response.
| Field | What to include in the request |
|---|---|
| Use and grade | Application, requested designation and whether alternatives may be reviewed |
| Section | Round diameter or flat width and thickness, units and tolerance |
| Supplied condition | Form, finish and any relevant drawing revision |
| Quantity | Requested net weight or length, plus any sample quantity |
| Packing | Pack size and label requirements |
| Inspection | Required checks, test basis and documents |
| Delivery | Destination, requested timing and trade term for comparison |
| Price details | Currency, quoted quantity tier, inclusions and offer validity |
When a FeCrAl wire price comes back, copy the offered grade and size to the same sheet. Compare them with the request before copying the amount into the final price column. A quote that calls out a proposed change gives you a specific item to review.
Use the SPARK FeCrAl heating alloy range to identify which material you want to discuss. Include your drawing and service details in the enquiry so the offered grade and dimensions can be confirmed.
Give Open Charges Their Own Line
Add a column for who will confirm each open charge. The supplier may need to confirm the packing cost, while your logistics team may need to check the cost from the named delivery point to your receiving location. Keep those responsibilities visible when you share the comparison.
Give the FeCrAl wire price worksheet a date and keep the latest offer beside it. If the destination, requested quantity or pack size changes, ask which parts of the offer still apply. Once the new response arrives, use its confirmed figures for the next comparison and retain the earlier response as a record of the change.
Review the Price After the Specification
Read each quote in the same order. Check the offered material and dimensions, then quantity, packing, inspection and delivery. Confirm the FeCrAl wire price and the date through which it applies after you have identified what the offer covers.
Write the response beside each requested field. Mark deviations and missing details, and send a short list of questions to the supplier. Ask for the answers to refer to the same quote number and drawing revision.
After agreement, keep the final offer with the specification used for the order. Receiving staff can use that record to identify the wire and check the documents. Purchasing can use it to check agreed charges. It also gives the buyer a clear baseline for a future FeCrAl wire price request.
Questions About FeCrAl Wire Price
Can I Compare a Spool Price With a Price per Kilogram?
Yes, if you confirm the net wire weight for the spool and match the material and size. Divide the price covering the wire by the net weight. Keep delivery costs in a separate line until both offers cover the same destination and terms.
Is the Minimum Order the Same for Every Size?
Ask the supplier which quantity applies to the exact grade and diameter. List each size and quantity in your request. Ask whether the FeCrAl wire price applies to each line separately and whether a sample offer is available.
Can I Request a Quote With Only a Grade Name?
A grade name can start the discussion. Add the section, tolerance, supplied condition, required quantity and intended use when you have them. Mark any open requirements so the supplier can explain what information is needed for an offer.
What Makes a Quote Ready for Comparison?
A FeCrAl wire price is ready to compare once the grade, dimensions, quantity, inspection and delivery scope are clear. Use the confirmed net quantity to check the unit price. Keep proposed changes with the quote until the relevant reviewer has considered them.
Prepare the drawing, wire specification and requested quantity before comparing offers. Keep the final FeCrAl wire price beside the conditions and costs it covers. Send SPARK your completed wire request to discuss the material and the scope of the quotation.